Anmol Chemicals

Anmol Chemicals is a several decades old manufacturing company. It is the pioneer manufacturers of Calcium phosphate monobasic dibasic and tribasic, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. They have several manufacturing facilities spread across India. The group has toll manufacturers and representatives in UAE, Europe & USA.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ------------ Contact

Drum Packing Palletized Drum Packing Palletized & Shrink Wrapped. 25 50kg HDPE Laminated Bags. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai Jumbo Packing Tricalcium Phosphate or Tribasic Calcium Phosphate Tribasic Manufacturers

Tricalcium Phosphate Tribasic Calcium Phosphate Tribasic Manufacturers

Tribasic Calcium Phosphate Tribasic CAS Number 7758-87-4 or 1306-06-5--, Molecular Weight 310.18--, Chemical Formula: Ca5(OH)(PO4)3

Arabic تريكالسيوم الفوسفات، فوسفات الكالسيوم مصنعي تريباسيك
Italian Fosfato tricalcico, calcio fosfato tribasico produttori
Spanish Fosfato tricálcico, fosfato de calcio tribásico fabricantes
Portugese Fosfato tricálcico, fosfato de cálcio tribásico fabricantes
Dutch Tricalciumfosfaat, calciumfosfaat TRIBASISCH fabrikanten
German Tricalciumphosphat, Kalziumphosphat dreibasischem Hersteller
French Phosphate tricalcique, Phosphate de Calcium tribasique fabricants

Monocalcium Phosphate or Calcium Phosphate Monobasic Manufacturers
Dicalcium Phosphate or Calcium Phosphate Dibasic Manufacturers
Tricalcium Phosphate or Calcium Phosphate Tribasic Manufacturers

MSDS Tricalcium Phosphate Tribasic Calcium Phosphate Tribasic Manufacturers

Calcium Phosphate Tribasic
Tricalcium Phosphate Pure & IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Calcium Phosphate Tribasic

We offer calcium phosphate tribasic, monobasic dibasic and in commercial pure and in IP BP USP FCC Food grade.

Tribasic Calcium Phosphate BP

Calcium Phosphate BP
7758-23-8

DEFINITION
Calcium phosphate consists of a mixture of calcium phosphates. It contains not less than 35.0 per cent and not more than the equivalent of 40.0 per cent of Ca (Ar 40.08).

CHARACTERS
A white or almost white powder, practically insoluble in water. It dissolves in dilute hydrochloric acid and in dilute nitric acid.

IDENTIFICATION
A. Dissolve 0.1 g in 5 ml of a 25 per cent V/V solution of nitric acid R. The solution gives reaction (b) of phosphates (2.3.1).
B. It gives reaction (b) of calcium (2.3.1). Filter before adding potassium ferrocyanide solution R.
C. It complies with the limits of the assay.

TESTS
Solution S
Dissolve 2.50 g in 20 ml of dilute hydrochloric acid. If the solution is not clear, filter  it. Add dilute ammonia drop-wise until a precipitate is formed. Dissolve the precipitate by adding dilute hydrochloric acid and dilute to 50 ml with distilled water.
Chlorides
Dissolve 0.22 g in a mixture of 1 ml of nitric acid and 10 ml of water and dilute to  100 ml with water. 15 ml of the solution complies with the limit test for chlorides  (0.15 per cent).
Fluorides
Not more than 75 ppm of F, determined potentiometrically (2.2.36, Method I) using a  fluoride-selective indicator electrode and a silver-silver chloride reference electrode.
Sulphates
Dilute 1 ml of solution S to 25 ml with distilled water 15 ml of the solution  complies with the limit test for sulphates (0.5 per cent).
Arsenic
5 ml of solution S complies with limit test A for arsenic (4 ppm).
Iron
Dilute 0.5 ml of solution S to 10 ml with water R. The solution complies with the limit  test for iron (400 ppm).
Heavy metals
Dilute 13 ml of solution S to 20 ml with water. 12 ml of the solution complies with limit test A for heavy metals (30 ppm).
Acid-insoluble matter
Dissolve 5.0 g in a mixture of 10 ml of hydrochloric acid and 30 ml of water.  Filter, wash the residue with water and dry to constant mass at 100°C to 105 °C.  The residue weighs not more than 10 mg (0.2 per cent).
Loss on ignition
Not more than 8.0 per cent, determined on 1.000 g by ignition at 800 °C for 30 min


Tribasic Calcium Phosphate USP

Tribasic Calcium Phosphate
Ca5(OH)(PO4)3 502.31
Calcium hydroxide phosphate (Ca5(OH)(PO4)3).
Calcium hydroxide phosphate (Ca5(OH)(PO4)3) [12167-74-7].

Tribasic Calcium Phosphate consists of a variable mixture of calcium phosphates having the approximate composition 10CaO·3P2O5·H2O. It contains not less than 34.0 percent and not more than 40.0 percent of calcium (Ca).

Identification
A: To a warm solution in a slight excess of nitric acid add ammonium molybdate TS: a yellow precipitate is formed.
B: It responds to the flame test for Calcium.
Loss on ignition— Ignite it at 800 for 30 minutes: it loses not more than 8.0% of its weight.
Water-soluble substances— Digest 2 g with 100 mL of water on a steam bath for 30 minutes, cool, add sufficient water to restore the original volume, stir well, and filter. Evaporate 50 mL of the filtrate in a tarred porcelain dish on a steam bath to dryness, and dry the residue at 120 to constant weight: the weight of the residue does not exceed 5 mg (0.5%).
Acid-insoluble substances— If an insoluble residue remains in the test for Carbonate, boil the solution, filter, wash the residue well with hot water until the last washing is free from chloride, and ignite the residue to constant weight: the weight of the residue does not exceed 4 mg (0.2%).
Carbonate— Mix 2 g with 20 mL of water, and add 3 N hydrochloric acid, drop wise, to effect solution: no effervescence is produced.
Chloride— Dissolve 500 mg in 25 mL of 2 N nitric acid, and add 1 mL of silver nitrate TS: the turbidity does not exceed that produced by 1.0 mL of 0.020 N hydrochloric acid (0.14%).
Sulfate— Dissolve 500 mg in the smallest possible amount of 3 N hydrochloric acid, dilute with water to 100 mL, filter, if necessary, and to 25 mL of the filtrate add 1 mL of barium chloride TS: the turbidity does not exceed that produced by 1.0 mL of 0.020 N sulfuric acid (0.8%).
Arsenic — The limit is 3 ppm.
Barium— Mix 500 mg with 10 mL of water, heat, add hydrochloric acid drop-wise until solution is effected, and then add 2 drops of the acid in excess. Filter, and add to the filtrate 1 mL of potassium sulfate TS: no turbidity appears within 15 minutes.
Dibasic salt and calcium oxide— Weigh accurately about 1.5 g, and dissolve by warming with 25.0 mL of 1 N hydrochloric acid VS. Cool, and slowly titrate the excess of 1 N hydrochloric acid, while agitating constantly, with 0.1 N sodium hydroxide VS to a pH of 4.0, determined potentiometrically. Not less than 13.0 mL and not more than 14.3 mL of 1 N hydrochloric acid is consumed for each g of salt, calculated on the ignited basis.
Limit of fluoride— [NOTE—Prepare and store all solutions in plastic containers.]: The limit is 0.0075%.
Limit of nitrate— Mix 200 mg with 5 mL of water, and add just sufficient hydrochloric acid to effect solution. Dilute with water to 10 mL, add 0.20 mL of indigo carmine TS, then add, with stirring, 10 mL of sulfuric acid: the blue color persists for not less than 5 minutes.


Calcium Phosphate, Tribasic FCC Food Grade

Tricalcium Phosphate; Precipitated Calcium Phosphate
Calcium Hydroxyapatite
Ca3(PO4)2 Formula wt 310.18
Ca5OH(PO4)3 Formula wt 502.31
Ca10(OH)2(PO4)6 Formula wt 1004.61
INS: 341(iii) CAS: [7758-87-4]
CAS: [1306-06-5]
CAS: [62974-97-4]

DESCRIPTION
Calcium Phosphate, Tribasic, occurs as a white powder that is stable in air. It consists of a variable mixture of calcium phosphates. It is insoluble in alcohol and almost insoluble in water, but it dissolves readily in dilute hydrochloric and nitric acids.
Function: Ant caking agent; buffer; nutrient; clouding agent.

REQUIREMENTS
Identification
A. Add ammonium molybdate TS to a warm solution of sample in a slight excess of nitric acid. A yellow precipitate forms.
B. Dissolve about 100 mg of sample by warming it with 5 mL of 2.7 N hydrochloric acid and 5 mL of water; while shaking, add 1 mL of 6 N ammonium hydroxide, drop-wise and then add 5 mL of ammonium oxalate TS. A white precipitate forms.
Assay: Not less than 34.0% and not more than 40.0% of calcium (Ca).
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.0075%.
Lead: Not more than 2 mg/kg.
Loss on Ignition: Not more than 10.0%.

Tricalcium Phosphate Manufacturers
Tribasic Calcium Phosphate Tribasic Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

logo

Aluminum chloride -- Aluminium chloride -- Ammonium persulfate -- Ammonium bromide -- Ammonium sulfate -- Ammonium phosphate monobasic dibasic -- Barium chloride -- Borax Calcium phosphate -- Sodium Borate -- Calcium saccharate -- Ceric ammonium nitrate -- Cupric chloride -- Calcium Hydroxide -- Citric acid -- Isatoic anhydride -- Magnesium sulfate -- Maleic acid -- Manganese Sulfate -- Methylene blue -- Potassium phosphate monobasic dibasic tribasic -- Sodium formaldehyde bisulfite -- Sodium bromide -- Sodium diacetate -- Sodium Bicarbonate -- Sodium hydroxide pellets, Potassium hydroxide pellets -- Sodium Phosphate monobasic dibasic tribasic --

Exports to USA, Canada,  UAE, Europe, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

Copyright and Usual Disclaimer is Applicable. 12 March, 2013

Tribasic Calcium Phosphate Tribasic or Tricalcium Phosphate Suppliers, Exporters, Manufacturers